La Scourtinerie

Installation Triangular Design

How to hang my triangular shade sail ?

In order to install the shade sail, galvanized steel heart shaped thimbles are necessary. We sell a quick and easy assembly kit : 1 heart shaped thimble + 2 plastic cable ties + some fine rope to hide the plastic cable.

0

Place your heart shaped thimbles into the loops, following step by step the instructions of the manual.

0

Once the 3 loops are reinforced with heart shaped thimbles, connect them to your fixation points (wall mounts, poles, strong tree branches …) using thick coir rope or steel cable, and following the alignment of the triangle’s median line (see second drawing).

Technical detail : In order to choose well your fixation points, you’ll have to consider the shade sail’s weight : 1,2 kg/m² and 2,4 kg/m² once it is wet.

The more distance you measure between each corner and its fixation point (poles or distant tree branches …), the more you’ll have to comply with the crossed ropes alignment, as it is shown in the drawing below.

Depending of this distance, you’ll have to choose one or the other 2 ropes (Ø 1 cm ou  Ø 1,4 cm).

Fixation points placement aligned with reinforced ropes :

Installation equipment for Design 2, Design 3 and triangular design :

Easy installation of galvanized steel heart shaped thimbles in the loops.

It allows cables and ropes to slide more easily in the loops in order to hang the shade sail. It also protects the inside of the loop.

Easy assembly kit : 1 heart shaped thimble + 2 plastic cable ties + 1 m of fine rope

We sell different rope diameters (1 cm and 1,4 cm). The choice depends on the shade sail’s dimension and the distance between fixation points.

Triangular shade sail

Catalog

Scroll to Top
[]